In this post we will see class 8th science chapter 1 solution by expert teacher.
You can check the Complete Science Solution here – NCERT Class 8th Science Solutions – Complete Solution List
Chapter 1 Solutions
1. Select the correct word from the following list and fill in the blanks .
Float, Water, Crop, nutrients, preparation
a) The same kind of plant grown and cultivated on a large scale at a place is called _________.
(b) The first step before growing crops is ________ of the soil.
(c) Damaged seeds would _________ on top of water.
(d) For growing a crop ,sufficient sunlight and _________ and _________ from the soil are essential.
Answer –
(a) The same kind of plants grown and cultivated on a large scale at a place is called _ crop _.
(b) The first step before growing crop is _ preparation__ of the soil.
(c) Damaged seeds would __float__ on top of water.
(d) For growing a crop, sufficient sunlight and _ water __ and _ nutrients_ from the soil are essential.
2. Match items in column A with those in column B.
|
A |
B |
||
|
(i) |
Kharif crops |
(a) |
Food for cattle |
|
(ii) |
Rabi crops |
(b) |
Urea and super phosphate |
|
(iii) |
Chemical fertiliser |
(c) |
Animal excreta, cow dung, urine and plant waste |
|
(iv) |
Organic manure |
(d) |
Wheat, gram, pea |
|
(e) |
Paddy and maize |
Answer –
|
A |
B |
||
|
(i) |
Kharif crops |
(e) |
Paddy and maize |
|
(ii) |
Rabi crops |
(d) |
Wheat, gram, pea |
|
(iii) |
Chemical fertiliser |
(b) |
Urea and super phosphate |
|
(iv) |
Organic manure |
(c) |
Animal excreta, cow dung, urine and plant waste |
3. Give two examples of each.
(a) Kharif crop – Paddy , Maize
(b) Rabi crop – Wheat , gram .
4. Write a paragraph in your own words on each of the following.
1. Preparation of soil – It is the first method to be followed before growing a crop. This method is usually employed for loosening the soil to allow the roots to penetrate deep into it. The loosening of the soil helps in the growth of several microbes, earthworm, etc. Which enrich the soil with humus and other essential nutrients. Plants require nutrients for their proper growth and functioning. The process of loosening is called tilling or ploughing the soil. Tilling of soil brings the nutrients – rich soil to the top. This helps the plants to utilize the nutrients for their proper growth.
2. Sowing – Sowing is another important step in crop production. It is the process of placing the seed in or on the soil for future growth. The seeds that are selected for growing should be of good quality. This will improve the net yield of the crop . Sowing is usually done with the help of either a traditional tool or a seed drill. The traditional tool is shaped like a funnel. It was used earlier for sowing seed. Nowadays, seed drill that makes the use of tractor are used for sowing seeds. This tool disperses seeds uniformly and sows seed at proper depth. Sowing by this method saves time and also protected the seeds from birds.
3. Weeds – Undesirable plants that grow along with the crop are known as weeds. Weeding is the process of removing these weeds , Xanthium, Parthenium, etc. are some common weeds. Weeds compete with the crop for nutrients, light, and space. As a result, crop plants get lesser nutrients, light, and space for their development. This in turn, reduces their productivity. Thus, various weeding methods are employed.
Some important weeding methods are:
(i) Weeds can be controlled using weedicides. It is a chemical, which is sprayed in the fields to kill all available weeds. Weedicide s are not harmful to the crop .
(ii) Tilling before sowing of crops also helps in removing weeds. Tilling uproots the weeds. The best time for removal of weeds is before they produce flowers and seeds.
(iii) The manual method of removing weeds is with the help of a khurpi. It involves regular uprooting or cutting of weeds close to the ground.
4. Threshing:
Threshing is the process of separating grains or seeds from chaff. It is done after harvesting the crop. It is usually carried out with the help of a machine known as ‘Combine’. This machines is a combined harvestar and thresher. It harvests plants as well as clean grains.
5. Explain how fertilisers are different from manure.
Answer – Differences between fertilisers and manure:
|
Fertiliser |
Manure |
|
Fertilisers are commercially available plant nutrients. |
Manure is a natural substance prepared by the decomposition of animal excreta and plant wastes. |
|
They can be organic or inorganic in nature. |
Manure is known to have a large quantity of organic materials and very little amount of plant nutrients. |
|
They ensure healthy growth and development of plants by providing them with nitrogen, phosphorus, potassium, etc. |
They help in enriching the soil with organic matter and nutrients. |
|
The addition of fertilisers to the soil requires special guidelines such as dose time, post addition precautions, etc., to be followed. |
The addition of manure does not require any special guidelines. |
|
A fertiliser does not provide any humus to the soil. |
Manure provide humus to the soil. |
|
Its excessive use causes water pollution. It cannot replenish organic matter of soil. |
6. What is irrigation? Describe two methods of irrigation which conserve water.
Answer – Irrigation is the process by which is supplied to crop at different intervals. The time and frequency of irrigation varies according to different seasons, crops, and soil types. There are various sources of irrigation such as wells, canals, rivers, dams, ponds, and lakes.
Two methods of irrigation which help in conservation of water are:
a) Sprinkler system:
This system is more useful on uneven land, having fewer water supplied using pipe to one or more central location within the field, when water is allowed to flow under high pressure with the help of a pump. It gets sprinkled on the crop.
b) Drip system:
In this system, water is delivered at or near the roots of plants, drop by drop. This is the most efficient method of irrigation as there is no wastage of water at all. This method is important in areas where water availability is poor.
7. If wheat is sown in the kharif season, what would happen? Discuss.
Answer – If wheat is sown in the kharif season (from june to octomber )then the whole crop might get destroyed because of many factors such as Lack of optimum temperature, adaplability, availability of pests, etc. Kharif season includes the rainy season, which is not favourable for the growth of wheat crop. Therefore, Wheat should not be sown during this season.
8. Explain how soil gets affected by the continous plantation of crops in a field.
Answer – Continuous plantation of crops in the field makes the soil poor in certain nutrients such as nitrogen, phosphorous, etc. Plants require nutrients for their proper growth and functioning. When a farmer continuese to grow crops one after the other, then all nutrients available in the soil reduce and the crop yeild decreases automatically.
9. What are weeds? how can we control them ?
Answer – Undesirable plants that grow along with crop plants are known as weeds. Xanthium, Parthenium, etc. are some common weeds. Weeds compete with the crop for nutrients, light, and space. As a result, crop plants get lesser nutrients, light, and space for their development. This in turn, reduces their productivity. Thus, various weeding methods are employed.
Some important weeding methods are
1)Weeds can be controlled using weedicides. It is a chemical, which is sprayed in the field to kill all available weeds, Weedicides are not harmful to the crop.
2) Tilling before sowing of crops also helps in removing weeds. Tilling uproots the weeds. The best time for the removal of weeds is before they produce flowers and seeds.
3) The manual method of removing weeds is with the help of a khurpi. It involves regular uprooting or cutting of weeds close to the ground.
10. Arrange the following boxes in proper order to make a flow chart of sugarcane crop production.
Answer –
Flow chart of sugarcane crop production:
11. Complete the following word puzzle with the help of of clues given below.
Down
1. Providing water to crops.
2. Keeping crop grains for a long time under proper conditions.
5. Certain plants of the same kind grown on a large scale.
Across
3. A machine used for cutting the matured crop.
4. A rabi crop that is also one of the pulses.
6. A process of separating the grain from chaff.
Answer –
Down
1.IRRIGATION
2. STORAGE
5. CROP
Across
3. HARVESTOR
4. GRAM
6. WINNOWING
You can check the Complete Science Solution here – NCERT Class 8th Science Solutions – Complete Solution List
You can see other posts here,
- Class 8th NCERT Science Solutions Chapter 8 – Cell Structure and Function
- Class 8th NCERT Science Solution Chapter 7 – Conversation of Plant and Animal
- Class 8th NCERT Science Solution Chapter 6 – Combustion and Flame
- Class 8th NCERT Science Solution Chapter 5 – Coal and Petroleum
Tags – NCERT science solution, NCERT solution for class 8th science, Science solution class 8th, 8th class science solution chapter 1, 1chapter science solution 8th class, chapter 1 science solution for class 8th.
